Cat6A Shielded Plenum Ethernet Cable 1000ft 23AWG Solid Bare Copper 750MHz PoE+ ETL Listed
-
23AWG Solid Bare Copper · 4 Shielded Pairs
-
FEP Insulation · Flame Retardant PVC Jacket
-
AL-Foil FTP Shield + Drain Wire · FEP Ins.
-
CMP/FT6 Rated · C(ETL) Listed · TIA-568-C.2
-
750MHz · 10G Base-T · PoE/PoE+/PoE++
SAVE MORE
on Bulk Orders
The more you buy, the more you save!
| QTY | Price Per Item | Your Savings |
|---|---|---|
| 3–9 units | $612.06 / unit | 3% |
| 10–19 units | $599.44 / unit | 5% |
| 20+ units | $586.82 / unit | 7% |
Price-match guarantee
FREE shipping
Lifetime warranty
Cat6A Shielded Plenum Ethernet Cable 1000ft 23AWG Solid Bare Copper 750MHz PoE+ ETL Listed
-
𝐂𝐎𝐃𝐄-𝐑𝐄𝐐𝐔𝐈𝐑𝐄𝐃 𝐅𝐎𝐑 𝐏𝐋𝐄𝐍𝐔𝐌 CMP/FT6 jacket is required by fire code for air-handling spaces above drop ceilings — and also covers CMR and every lower-rated installation.
-
𝐅𝐄𝐏 𝐈𝐍𝐒𝐔𝐋𝐀𝐓𝐈𝐎𝐍 𝐅𝐎𝐑 𝐏𝐋𝐄𝐍𝐔𝐌 FEP produces significantly less toxic smoke than FR-PVC and meets the stricter CMP flame spread requirements essential in plenum air-handling spaces.
-
𝐒𝐇𝐈𝐄𝐋𝐃𝐒 𝐄𝐌𝐈 𝐀𝐁𝐎𝐕𝐄 𝐂𝐄𝐈𝐋𝐈𝐍𝐆 AL-foil and drain wire block EMI from HVAC, motors, and dense wiring in the plenum space where unshielded Cat6A UTP would degrade signal integrity.
-
𝐒𝐎𝐋𝐈𝐃 𝐁𝐀𝐑𝐄 𝐂𝐎𝐏𝐏𝐄𝐑 𝟐𝟑𝐀𝐖𝐆 Solid bare copper conductors deliver superior conductivity and reliable 10G performance at 750MHz — across every shielded plenum run, every time.
-
𝐏𝐑𝐎 𝐈𝐍𝐒𝐓𝐀𝐋𝐋𝐀𝐓𝐈𝐎𝐍 𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒 1000ft reel with spline separator, rip cord, and sequential footage markings. Requires shielded RJ45 connectors and proper grounding at both ends.
Description
Description
Cat6A FTP shielded plenum ethernet cable combines aluminum foil shielding with CMP/FT6 fire certification — the most demanding Cat6A configuration for interference-heavy spaces. Required by code above ceilings and raised floors. Supports 10G Base-T and PoE/PoE+/PoE++ up to 100W.
FEP insulation produces less toxic smoke than PVC and meets the stricter CMP flame-spread requirements. AL-foil with a drain wire wraps all four pairs for groundable EMI shielding — unshielded UTP would degrade signal here. A spline separator adds a second crosstalk layer. FTP requires shielded RJ45 and grounding.
Standards: C(ETL) Listed FT6 CMP · C(ETL)US Verified ANSI/TIA-568-C.2 · RoHS Compliant
Technical Specifications:
• Conductor: Solid Bare Copper · AWG: 23 · Pairs: 4 FTP (Shielded)
• Shield: AL-Foil + Drain Wire · Insulation: FEP
• Jacket: FR-PVC CMP/FT6 · Separator: Yes · Ripcord: Yes
• Performance: 750MHz · 10G Base-T · OD 0.3153 in. · NVP 69% · PoE/PoE+/PoE++
• Packaging: 1000ft Reel · 2 Colors Available
Typical Applications:
• Above-ceiling plenum runs with EMI from HVAC and motors
• 10G network backbones in data centers, hospitals, and schools
• PoE-powered IP cameras, access points, and network devices
• Structured cabling for commercial and government buildings
• Any install requiring the highest fire-safety and EMI protection
Specifications
Specifications
-
Colors
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.